Comments on: Tutorial: Ethereum Mining Rig Part 4 (ethOS installation) https://1stminingrig.com/tutorial-ethereum-mining-rig-part-4-ethos-installation/ Just Another Mining Blog Thu, 01 Jul 2021 16:57:12 +0000 hourly 1 https://wordpress.org/?v=6.5.8 By: Ciprian V. https://1stminingrig.com/tutorial-ethereum-mining-rig-part-4-ethos-installation/#comment-10162 Thu, 22 Feb 2018 09:47:00 +0000 http://1stminingrig.com/?p=407#comment-10162 In reply to Elvin Luccon.

The flashing must be done via Windows!

]]> By: Elvin Luccon https://1stminingrig.com/tutorial-ethereum-mining-rig-part-4-ethos-installation/#comment-10155 Thu, 22 Feb 2018 04:43:00 +0000 http://1stminingrig.com/?p=407#comment-10155 When setting the overclock in ethOs. Do I need to do anything with my gpus? I keep reading flash them how?

]]> By: Tal Ben-Eliezer https://1stminingrig.com/tutorial-ethereum-mining-rig-part-4-ethos-installation/#comment-9925 Mon, 05 Feb 2018 02:00:00 +0000 http://1stminingrig.com/?p=407#comment-9925 In reply to Ciprian V..

how do you do that?

]]> By: Ciprian V. https://1stminingrig.com/tutorial-ethereum-mining-rig-part-4-ethos-installation/#comment-9917 Sun, 04 Feb 2018 12:15:00 +0000 http://1stminingrig.com/?p=407#comment-9917 In reply to Abhi Pachhapur.

Nope, you will have to modify the original rom

]]> By: Abhi Pachhapur https://1stminingrig.com/tutorial-ethereum-mining-rig-part-4-ethos-installation/#comment-9911 Sun, 04 Feb 2018 05:25:00 +0000 http://1stminingrig.com/?p=407#comment-9911 In reply to Ciprian V..

I am trying sudo atiflash on ethos to flash my gpus. Need rom file for Sapphire 11266-09-20G Radeon NITRO+ RX 570 8GB GDDR5 card. Would v4.rom you shared work for these cards? Please advice.

]]> By: Ciprian V. https://1stminingrig.com/tutorial-ethereum-mining-rig-part-4-ethos-installation/#comment-9894 Sat, 03 Feb 2018 08:41:00 +0000 http://1stminingrig.com/?p=407#comment-9894 In reply to Abhi Pachhapur.

You can’t do it on ethos.. you will have to do that on windows.. :/

]]> By: Abhi Pachhapur https://1stminingrig.com/tutorial-ethereum-mining-rig-part-4-ethos-installation/#comment-9889 Sat, 03 Feb 2018 03:43:00 +0000 http://1stminingrig.com/?p=407#comment-9889 In reply to Ciprian V..

No, I am still figuring out how to do it on ethos. I do not have windows machine. My personal laptop is a Mac. What is your thought me running dual boot ethos and windows10 on the same SDD?

]]> By: Jask https://1stminingrig.com/tutorial-ethereum-mining-rig-part-4-ethos-installation/#comment-9884 Fri, 02 Feb 2018 14:02:00 +0000 http://1stminingrig.com/?p=407#comment-9884 Thanks a lot 🙂 Great work !!
One question. Is it possible to change the RX580 bios from Linux distribution???

]]> By: Jim https://1stminingrig.com/tutorial-ethereum-mining-rig-part-4-ethos-installation/#comment-9872 Thu, 01 Feb 2018 13:15:00 +0000 http://1stminingrig.com/?p=407#comment-9872 In reply to Ciprian V..

Do you mean in the local.conf file from ethos? I used the ports from the guide on ethermine (using US west) in the config file, I don’t see anywhere in the config file on where to modify local ip’s or ports. Here is a link to the default setup ( I should add that this setup works, but only on nanopool)- http://ethosdistro.com/pool.txt

]]> By: Ciprian V. https://1stminingrig.com/tutorial-ethereum-mining-rig-part-4-ethos-installation/#comment-9868 Thu, 01 Feb 2018 11:10:00 +0000 http://1stminingrig.com/?p=407#comment-9868 In reply to Jim.

That is a local ip.. have you added the port to proxypool ?

]]>