Comments on: Nvidia Gigabyte GeForce GTX 1070 G1 Gaming Mining Rig Tutorial https://1stminingrig.com/nvidia-gigabyte-geforce-gtx-1070-g1-gaming-mining-rig-tutorial/ Just Another Mining Blog Thu, 01 Jul 2021 16:24:42 +0000 hourly 1 https://wordpress.org/?v=6.5.8 By: Ciprian V. https://1stminingrig.com/nvidia-gigabyte-geforce-gtx-1070-g1-gaming-mining-rig-tutorial/#comment-9988 Thu, 08 Feb 2018 21:28:00 +0000 http://1stminingrig.com/?p=4715#comment-9988 In reply to The Calzone.

Never faced such problem :/

]]> By: The Calzone https://1stminingrig.com/nvidia-gigabyte-geforce-gtx-1070-g1-gaming-mining-rig-tutorial/#comment-9979 Thu, 08 Feb 2018 12:14:00 +0000 http://1stminingrig.com/?p=4715#comment-9979 I️ have the same set up as yours and I️ run my fans at 100 but two fans on different cards have begun to wobble and then stop… if you have faced this problem how do you fix it? Thanks!

]]> By: Alexander Mario Sidawi https://1stminingrig.com/nvidia-gigabyte-geforce-gtx-1070-g1-gaming-mining-rig-tutorial/#comment-9624 Sun, 21 Jan 2018 16:19:00 +0000 http://1stminingrig.com/?p=4715#comment-9624 Why is this processor recommended over the newer 7/8th gen?

]]> By: Ben L https://1stminingrig.com/nvidia-gigabyte-geforce-gtx-1070-g1-gaming-mining-rig-tutorial/#comment-9605 Sat, 20 Jan 2018 20:33:00 +0000 http://1stminingrig.com/?p=4715#comment-9605 Hi Ciprian. I built my 8 GPU rig using this tutorial but am using the biostar tb250 btc+ mobo. I have no issues with detecting all 8 GPUs. However, when I run the Bitcoin Gold mining software, the last 4 GPUs show abnormal power (white blinking light near the VGA connectors). I can’t get the last 4 GPUs to work; shows 0 sols/s. I’ve tried troubleshooting with each card and all 8 work just fine. I thought it was the PSU but I switched it with the other PSU and got the same issue. I don’t know what else to do. What seems to be the problem?

]]> By: Ciprian V. https://1stminingrig.com/nvidia-gigabyte-geforce-gtx-1070-g1-gaming-mining-rig-tutorial/#comment-9505 Sun, 14 Jan 2018 22:21:00 +0000 http://1stminingrig.com/?p=4715#comment-9505 In reply to Phaltu Tango.

that’s strange.. can you attach some screenshots ?

]]> By: Phaltu Tango https://1stminingrig.com/nvidia-gigabyte-geforce-gtx-1070-g1-gaming-mining-rig-tutorial/#comment-9491 Sun, 14 Jan 2018 15:16:00 +0000 http://1stminingrig.com/?p=4715#comment-9491 In reply to Ciprian V..

I had freshly installed everything start from windows…
now the the speed for eth is 2.6Mhz.
But for ZCash its produces 430Sol/s

where I am lacking,
If some could help we may schedule a TeamViewer session.
Thanks

]]> By: Ciprian V. https://1stminingrig.com/nvidia-gigabyte-geforce-gtx-1070-g1-gaming-mining-rig-tutorial/#comment-9476 Sun, 14 Jan 2018 14:03:00 +0000 http://1stminingrig.com/?p=4715#comment-9476 In reply to Phaltu Tango.

Looks like you are doing something wrong.. not really sure. I recommend fresh install.

]]> By: Phaltu Tango https://1stminingrig.com/nvidia-gigabyte-geforce-gtx-1070-g1-gaming-mining-rig-tutorial/#comment-9447 Fri, 12 Jan 2018 11:39:00 +0000 http://1stminingrig.com/?p=4715#comment-9447 I had setup my mining rig with just a single card to setup.
But its just showing GPU0 1.501 Mh/s

Whats that means… why its too low

I there is some additional setting…
Please help

]]> By: Ciprian V. https://1stminingrig.com/nvidia-gigabyte-geforce-gtx-1070-g1-gaming-mining-rig-tutorial/#comment-9403 Thu, 11 Jan 2018 09:19:00 +0000 http://1stminingrig.com/?p=4715#comment-9403 In reply to Joshua Holmes.

While connecting to moelx those will go 100% fan speed all the time. But if you want to control you will need a 4 pin splitter

]]> By: Joshua Holmes https://1stminingrig.com/nvidia-gigabyte-geforce-gtx-1070-g1-gaming-mining-rig-tutorial/#comment-9371 Tue, 09 Jan 2018 17:05:00 +0000 http://1stminingrig.com/?p=4715#comment-9371 Hi Ciprian, I see you connect your fans to an extender, then connect that extender directly to the PSU by molex? Don’t the fans need to be connected to the motherboard for speed control?

]]>