Yes you can

Hi @ciprianpt:disqus ,

First of all, thank you very much for advice.
After I made the changes in local.conf-file I obtain no more then ~19Mh/s for 3 GPU’s and ~23.43 Mh/s for 1 GPU.

You have also other advice regarding to other changes which I can made to improve performace (like under-volt) ? Also any idea about how to export bios characteristic for my GPU from ethOS to Windows ?

I waiting with very higher interest your feedback.
Keep in touch.

All the BEST !!!

Stock gives 20 Mhs for both 3Gb and 6Gb. I overclock core 1400 and memory 4900, power 80 watt. My point was that the article says 3Gb cannot be used to mine Etherium but this is just wrong.

hi, you have stock settings? or OC ?

Hey @predoiuionut:disqus, first of all you will have to change core and mem

globalcore 2175
globalmem 4500

Your hashrate should increase to around 23.5 Mh/s

First of all I must specified at the beginning that I am a beginner in mining.
Second, I have an rig made using ASUS Z270-P as motherboard, 16 GB RAM memory, as operating system I use ethOS, and as GPU I use 4 NVidia from Gigabyte (model 1060 – 6Gb). I use wallet made/create on MyEtherWallet and I mine Ethereum Classic (ETC). As pool I use nanopool.org.

The actual performance related to my GPU’s (GeForce GTX 1060 6Gb) are resume to 68.1 hash for all 4 GPU’s.

For this “performance” I don’t change nothing on my default settings.
But I want to change the GPU’s performance only under-volt and overclock GPU’s without using BIOS modded (in the first instance). So, the settings use for “mine” are:

#—–My NANOPOOL Settings – ETC —–

# globalminer etcminer
maxgputemp 85
stratumproxy enabled
proxywallet
proxypool1 etc-eu1.nanopool.org:19999
proxypool2 etc-eu1.nanopool.org:19999
# poolpass1 x
# poolpass2 x
poolemail
flags –cl-global-work 8192 –farm-recheck 200
# globalcore 1000
# globalmem 1250
globalfan 85
# globalpowertune 20
# autoreboot false
# custompanel publicsecret
# lockscreen enabled
# globaldesktop disabled
# globalname disabled

* all lines commented ” https://uploads.disquscdn.com/images/c0c450110db5097541fd96b972f33c656512dab86b429b040312df7f048df4ee.png #” are not available also in my local.conf file from ethOS.

How I can change the settings in a way in which to increase the GPU’s performance without change BIOS (1st step of optimization) ? Also what command I must use (in terminal) to see the GPU’s performance when mine ?

You can help me please with some settings which you already have for this type of GPU and I can replace it with my settings ?
If in the 2nd step I want to optimized GPU performance using BIOS, how I can export the BIOS-file of card from ethOS, in a way in which to can optimized BIOS-file of GPU in Windows ?

I waiting your feedback with very higher interest your opinion/suggestions/advice !

Thank you in advance for support.

Can I turn on or off the HS110 from anywhere?
For example: when I’m using Wi-Fi in another place, like i’m in my college and the HS110 is connected in my home’s Wi-Fi

Not sure if i understand your question..