Comments on: Monero Mining – How to Mine Monero on Windows with CPU & GPU

By: Ciprian V.

Ciprian V. — Sun, 17 Dec 2017 22:01:00 +0000

In reply to Shariq Mushir. it is not a virus :)

By: Shariq Mushir

Shariq Mushir — Sun, 17 Dec 2017 13:27:00 +0000

Claymore’s CryptoNote Windows CPU Miner was deleted by my system calling it a virus. Probably won’t be using that. The virus is called Fuerboos.C!cl

By: Kuraizuke

Kuraizuke — Thu, 07 Dec 2017 13:27:00 +0000

In reply to Ciprian V.. Oh that's great. I'm planning to buy a computer this month and going to use 1 video card at first, then, will buy 2 or 3 video cards depending on my earnings to gain more mining power.

By: Ciprian V.

Ciprian V. — Thu, 07 Dec 2017 07:15:00 +0000

In reply to Kuraizuke. Yes, it can be profitable mining with only one GPU too!

By: Kuraizuke

Kuraizuke — Wed, 06 Dec 2017 10:14:00 +0000

Hi, can I mine Monero using a single Video Card? Will that still be profitable? If not, how many Video Card should I install to make mining XMR profitable? Thanks.

By: TofuMaster5000

TofuMaster5000 — Tue, 05 Dec 2017 00:15:00 +0000

In reply to Jason Dela Cruz. Hey Jason, I am trying to get my RX580s working with SGMINER as well. So far working fine and steady on claymore, but wanting to try sgminer for better results. Can you share which sgminer version you use, and what settings/commands you run in your batch file? I following all examples, but not seeing much happening after I run it, whether I run sgminer.exe directly and fill in the info, or use batch (with or without config both).

By: Ciprian V.

Ciprian V. — Tue, 03 Oct 2017 18:01:00 +0000

In reply to idi0cracy. can you show me your bat file settings ?

By: idi0cracy

idi0cracy — Tue, 03 Oct 2017 17:57:00 +0000

hi, i can’t mining with claymore cryptonote 10.2, i follow all the steps, but claymore wont start, only shows this “No pools specified! Specify at least one valid pool in -xpool parameter”, what should i do?

By: Jason Dela Cruz

Jason Dela Cruz — Mon, 02 Oct 2017 08:38:00 +0000

In reply to Ciprian V..

CORSAIR 850w. im using old desktop which can support 3GPU’s. at first i have this error in Claymore

04:03:45:115 d98 GPU 0: got incorrect temperature 511, ignore
04:03:45:123 d98 GPU 1: got incorrect temperature 511, ignore
04:03:45:130 d98 GPU 2: got incorrect temperature 511, ignore

and then i noticed that the GPU temp in GPU-Z is Ok. so i checked each risers, yet risers are all Ok.. so i check all the cables from PSU to make sure all cards are safe as i was thinking that PSU is providing so much power.. then i saw one SATA cable that got burnt. well.. lesson learned.. dont plugged 3 GPU in 1 SATA cable at a time…

By: Ciprian V.

Ciprian V. — Mon, 02 Oct 2017 08:17:00 +0000

In reply to Jason Dela Cruz. Ooops.. what psu ?