Comments on: How to FIX & RE-Flash BIOS of Bricked GPU on RX 470 / 480 Series

By: Nikola

Nikola — Thu, 22 Feb 2018 22:13:00 +0000

I don’t understand one thing, it is not explained anywhere.
Let’s say the card has 2 bios. If the first bios is wrong, I switch to silent mode and do a flash bios, is it then only flash bios 2 (silent bios)? And I want to fix BIOS 1 that is defective. How to Flash Bios 1 from Silent Bios Mod? Thank you

By: Diyan yap

Diyan yap — Sat, 03 Feb 2018 16:50:00 +0000

I tried those step and works well. thank you so much. But now i only use the “si;ent ” mode, every time i switched to “OC” mode, its hang/not works, any idea

By: JC Borlagdan

JC Borlagdan — Thu, 25 Jan 2018 23:25:00 +0000

In reply to Ciprian V..

I can’t boot from the Original Bios,. I can only turn on the pc when I’m in silent bios,..
What I tried was:
1) Turn on on silent bios
2) Switch the bios
3) Start AtiWinFlash.exe as admin
4) Load original bios but i’m getting error Error reading from ROM

I wasn’t able to revive the original bios the right side switch. Getting no display, And i can’t use on board iGPU because I have Ryzen 3 1300x as my cpu

By: Ciprian V.

Ciprian V. — Thu, 25 Jan 2018 20:59:00 +0000

In reply to JC Borlagdan. have you followed my instructions ?

By: JC Borlagdan

JC Borlagdan — Mon, 22 Jan 2018 06:34:00 +0000

I fcked up my original bios. Actually, it’s not my fault, it’s my PC’s fault, coz after switching to my flashed bios, the pc hanged and now it’s not turning on, I’m using my silent BIOS now,.. will your solution work on reviving an original bios from silent bios?

By: Ciprian V.

Ciprian V. — Sun, 14 Jan 2018 14:04:00 +0000

In reply to Evgeni Enchev. Is this Nitro+ ?

By: Evgeni Enchev

Evgeni Enchev — Fri, 12 Jan 2018 19:06:00 +0000

Hi I try to clock the bios of RX 570 8GB sapphire. Anybody know how to fix Brinked card. When I start them I see a stars Having a message no adapter detect. Any idea how to fix them Thanks in advance

By: E30Tomas

E30Tomas — Sat, 09 Dec 2017 21:18:00 +0000

In reply to MD Golam Mostafa.

CMD
atiflash.exe -p (or -pa, i don’t remember) ORIGINAL.rom -fp
It did force (-fp) writing bios regarding any security (this is ORIGINAL rom, so we shouldn’t worrie about any seciurity Right? I mean really Right?!) In my case right. Bios is back up and running :).

By: Codestaxx

Codestaxx — Sun, 03 Dec 2017 09:21:00 +0000

In reply to Ciprian V.. I did the same thing. I didn't know about the bios switch and I flashed the original ROM. I have 4 out of the 6 running stable 30Mhs but 2 are not stable and keep bringing the rig down. Why do you need to change the bios switch? Is it necessary?

By: Ciprian V.

Ciprian V. — Thu, 16 Nov 2017 07:00:00 +0000

In reply to Frank. Also try with 2.77